Verdict
Audiovector may have gone back to its roots with the Trapeze reimagined, but this is so much more than a pleasant stroll down Memory Lane…
Pros
Thrillingly direct, complete and unified sound
Superbly built and finished
Bold and unusual looks
Cons
This money can buy more expansive sound
Bold and unusual looks
Key Features
Freedom Grounding ConceptReduces distortion between the driver units in the loudspeaker
Damping FeatureAllows for a degree of flexibility in matching the speaker with amplifiers
Introduction
Revisiting former glories. Doing the greatest hits. However you want to frame it, the hi-fi industry has been looking back in an attempt to move forward for quite a while now – and Audiovector is the latest company to delve into its back catalogue in order to create a brand new product.
The Trapeze was the very first Audiovector loudspeaker, launched back in 1979 – so is this new version really ‘Reimagined’ or is it just an exercise in nostalgia?
Design
Completely singular shape
Choice of four finishes
Impressive standard of build and finish
In a world of homogenous loudspeaker design, the Audiovector Trapeze Reimagined are no less striking and individual where the look is concerned than I imagine the original model was getting on for 50 years ago. Individualistic doesn’t really begin to cover it.
Audiovector Trapeze Reimagined three-way speaker
Image Credit (Trusted Reviews)
As the photos confirm, the Trapeze Ri (which is Audiovector’s preferred way of describing this model, and is mercifully much easier to type at the same time) are not two identical speakers. Each mirrors the other in terms of the angle at which they present their drivers, and as such there’s a definite ‘left’ and ‘right’ -channel speaker in each pair.
And quite apart from the pronounced angularity of each cabinet, they’re also on the stubby side where floorstanding speakers are concerned. At 875 x 435 x 420mm (HWD) they’re atypical in every direction – but in any of the available finishes (black ash, white silk, Italian walnut or Nordic oak) the Trapeze Ri create a striking impression.
Audiovector Trapeze Reimagined stand
Image Credit (Trusted Reviews)
And the standard of build and finish is well up to the standard the asking price demands, too – the real wood veneer is flawless, the numerous edges and angles are crisp, and the silver trim at the bottom of the cabinet is good-looking too. Even the speaker terminal plate on the back and the screws holding the driver surrounds in place seem upmarket.
Specification
3-way design with isobaric bass system
23Hz – 53kHz frequency response
3800mm² Air Motion Transformer tweeter
The Audiovector Trapeze Ri is a three-way design – from the top down, each speaker features a 3800mm² Air Motion Transformer (AMT) to deal with high frequencies, a 130mm treated paper cone midrange driver and a 300mm treated paper cone bass driver. There’s also a 200mm treated paper cone bass driver inside the cabinet that’s configured to create an isobaric set-up with its visible partner.
Each of the visible circular drivers features a corrugated surround in an effort, according to Audiovector, to liberate maximum speed and dynamics. The AMT tweeter unit, meanwhile, has long been an Audiovector preoccupation – the company is convinced of its expansive dispersion characteristics and also favours it for its low distortion and even lower mass. The fact that it delivers a little visual drama doesn’t do any harm, either.
Audiovector Trapeze Reimagined AMT Tweeter
Image Credit (Trusted Reviews)
At the rear of each cabinet there is a single pair of speaker-cable binding posts. There’s also a three-position switch on the same plate, which offers some adjustment to help match the speakers to the damping factor of the amplifier that’s driving them.
And the plate also features a post for a grounding cable that connects to the earth terminal of the mains supply – Audiovector suggests that grounding the speakers this way can minimise the distortion the physical movement of the drivers can induce. When the Trapeze Ri first launched, Audiovector very boldly wanted £625 for its Freedom Grounding cable – happily, it has seen the error of having cost options available on a £15500 pair of loudspeakers and now the cable is part of the package.
Audiovector Trapeze Reimagined cabling
Image Credit (Trusted Reviews)
There are also two circular vents on the rear of the cabinet. The higher-up of the two allows the backward sound of the AMT to contribute to the overall sound, the other is a reflex port for the internal bass driver.
Audiovector says this entire arrangement results in a loudspeaker of 8 ohms nominal impedance and sensitivity of 88dB/W/m. Which should present no kind of electrical challenge to any amplifier deemed appropriate to drive speakers as expensive and high-achieving as these.
Sound Quality
Forceful, poised and informative sound
Remarkable midrange clarity
Could conceivably sound more expansive
With just one meaningful exception, the way the Audiovector Trapeze Reimagined perform is thoroughly and uncomplicatedly impressive. It doesn’t matter the sort of music you like to listen to, these speakers get to the heart of it in the most direct and unequivocal manner.
At the top of the frequency range, that ATM arrangement serves up treble sounds with absolute positivity. There’s ample bite and shine to the top end here, but even if you play at considerable volume (and be assured the Audiovector are more than happy to play at considerable volume) it never tips into hardness or brightness.
There’s substance to the treble as well as brilliance, in addition to an absolute stack of detail both broad and fine. The dynamic variations in a top end-centric recording like Laurie Anderson’s Let X=X / It Tango are expressed to the full, with dynamism to spare and impeccably judged tonality.
Audiovector Trapeze Reimagined bass speaker
Image Credit (Trusted Reviews)
The midrange is equally informative, equally convincing and equally direct in its presentation. The clarity and openness the Trapeze Ri give to a copy of Arooj Aftab’s Last Night is almost startling, and the rapidity and responsiveness of that midrange driver aren’t far behind. Tonality is approaching ideal inasmuch as it’s entirely uncoloured and naturalistic, and the second-stage dynamics apparently in her close-mic’d vocal and given beautifully judged emphasis.
And it probably won’t come as all that much of a surprise, given the thorough nature of the low-frequency arrangement here, to learn that the Audiovector are capable of absolutely implacable bass power. They demonstrate considerable extension, hit implacably hard, and are as fast and controlled at the bottom end as the very best of their price-comparable rivals. Rhythmic expression is never in doubt, speed and momentum are prodigious, and there’s very gratifying variation in the bass presence available here – the Trapeze Ri are extraordinarily insightful as well as iron-fisted. Clean, forceful and precise, the low-frequency activity these speakers generate is thrillingly complete.
Audiovector Trapeze Reimagined dispersion
Image Credit (Trusted Reviews)
Despite the number of drivers deployed here, integration and frequency response is smooth and convincing – the crossover points are basically imperceptible. This has the knock-on effect of making timing, the unity and togetherness of the presentation, something approaching impeccable – the singularity of the overall presentation has to be heard to be believed. And the tonal balance the speakers strike is similarly confident and convincing – the lack of colouration the Audiovector impose means the Trapeze Ri don’t seem to have any meaningful input in this respect.
Elsewhere, The Trapeze Ri are just as confident and just as impressive. Their management of tempos is remarkable – no matter the requirement of the material, the Audiovector deal with it coherently and they have the ability to just swing when material demands it. The lop-sided dub of King Tubby, some Quincy Jones’ Bossa Nova, the four-four boom-bap of Amon Tobin – it’s all the same to these speakers. And the amount of dynamic headroom they demonstrate is remarkable, the distance they’re able to put between quiet and loud is staggering.
Audiovector Trapeze Reimagined speaker cabinet
Image Credit (Trusted Reviews)
And the soundstage they can create is persuasive too. Even complex material is laid out carefully, with proper attention paid to spaces just as to elements of a recording – and every participant gets more than enough elbow-room in which to express themselves.
The Audiovector aren’t the most expansive loudspeakers this sort of money can buy, though – at no point does the sound ever really escape the outer edges of the speaker cabinets, and consequently they can sound marginally small-scale where some rivals sound big and immersive. But as for other shortcomings… no, I’ve got nothing.
Latest deals
Should you buy it?
For the aesthetics
If you like a little visual drama to go along with your barnstorming-yet-agile-and-communicative sound quality
You lack equally talented equipment
You’re not prepared to spend proportionate amounts of money on source equipment, cables and everything else
Final Thoughts
You might have considered the Audiovector Trapeze Reimagined to be a design exercise and a straightforward ‘this is where we’re coming from’ facsimile of a legendary product from back in the day.
And to be fair, they are – but they’re also so much more. Which just goes to prove you can’t judge a book by its cover, even if its cover looks mildly bonkers.
Trusted Score
How we test
We test every hi-fi speaker we review thoroughly over an extended period of time. We use industry-standard tests to compare features properly. We’ll always tell you what we find. We never, ever, accept money to review a product.
Find out more about how we test in our ethics policy.
Tested in the demonstration room at Renaissance Audio in Edinburgh (Renaissance is Audiovector’s UK distributor)
Tested over the course of a day
Listened to a variety of music via vinyl records and the TIDAL app, for an entire day, and without input from any other individual
You might like…
FAQs
Is there a grille to cover the drivers?
Yes, there is – it’s magnetically attached and covers the entire front baffle. I’m tempted to ask why you’d want to cover the front of a speaker that looks like this, though…
Why is the silver trim at the bottom proud of the main cabinet?
Audiovector says it’s to help prevent damage to the cabinet from vacuum cleaners and the like.
Can I have a different finish?
Audiovector is happy to paint your pair of Trapeze Ri in any ‘piano’ colour you like. It’ll cost you, mind…
Full specs
‹
UK RRP
USA RRP
EU RRP
CA RRP
AUD RRP
Manufacturer
Size (Dimensions)
Weight
Release Date
Driver (s)
Connectivity
Colours
Frequency Range
Sensitivity
Speaker Type
Impedance
Audiovector Trapeze Reimagined
£15500
$19950
€17000
CA$24000
AU$28750
Audiovector
435 x 420 x 875 MM
50 KG
2024
305mm bass; 203mm bass compound; 127mm midrange
Single-wire
White Silk, Italian Walnut, Black Ash, and Nordic Oak
23 53 – Hz
88 dB
Hi-Fi Speaker
8 ohms
›